Description
This IkonPRO 25mm RGB recessed decking kit extends the Ikon range, with its unique design of removable and interchangeable heads. The new Fresnel lenses improve lumen output, diffusing the spread of light evenly. Designed to be fitted and wired during the decking build stage without the heads. The supplied rubber caps protect the fitting from the elements until the decking is complete. Each individual IP67 head easily connects and can be placed into position quickly, adding the final touches to the decking design. There are three head sizes to choose from for the RGB kit. 10m Extension cable available (92019)
- Suitable for indoor or outdoor use
- Dimmable
- Supplied with remote rgb control
- Polished stainless steel & clear pc
- Constructed from stainless steel (304) & polycarbonate
- Super bright SMD LED technology
- Innovative new fitting method
- Improved lens design
- Complete with LED driver
- 10 x 0.75W LED module (SMD 5050) RGB (Included)
- RGB
- IP67
- Proj: 0mm Dia: 25mm
- Class 2
- Cut hole Dia: 20mm
Kit includes: 10 x 0.75W LED heads, 15W Driver, 5m Extension cable, 2 x 5 way looms & 3 Pin Plug
Fitting the Ikon Pro
Step 1 - Drill hole to the correct size
Step 2 - From below, push the wiring loom through the hole (without head)
Step 3 - Place weather protective cap onto the socket
Once the decking in complete
Step 4 - Place the LED heads onto the loom
Step 5 - Let the cap fall through the hole & firmly push the head into place. Repeat for all heads
Step 6 - Push the plug in and switch on to test
This product is operated by a small RF remote control. It has a maximum range of 10m, though this can be affected by walls and other solid objects The remote control has four buttons. One turns the unit on and off. One allows you to step through the colours in the following sequence; yellow, white, red, green, blue, purple and light blue. The next press will make the controller step through all the colours, and another press of the button, will move through the colours gradually. The other two buttons allow you to set the brightness of the LEDs as required
The Ikon Pro RGB ground light kit contains: 1 x 12V outdoor inline transformer with 2 metre extension lead, 10 x IP44 LED light fittings each with 1.5 (1.2 & 0.3) metres of cable, 1 x RF controller and 1 x 12V type 23A battery
Max of 10 metre range for the remote control
Not suitable to be used with timers or PIR sensors